Chevrolet C/K Series Pickup Accessories and Parts Installation And Review Videos

Trailer Brake Controller Installation - 1996 Chevrolet C/K Series Pickup- Video

Today on our 1996 Chevy CK Pickup truck, we'll be installing the ETB C7 in junction with the Tekonsha Progigy P3 Brake Controller which is part number 90195. We will first begin by picking a location where we're going to mount our 7-way trailer plug. In this case because the trailer hitch comes out so far, we're going to go ahead and drill two small holes in the underside of the bumper to mount our bracket. Once we have the holes drilled, we'll go ahead and use the supplied screws and nuts to attach the bracket to the lower bumper. Next we'll go ahead and take some of the wire looms supplied with the kit and put it over the wires coming out of the back of the 7-way. Then we'll go ahead and feed the 7-way onto the bracket and attach it with the supplied screws and nuts. Next, we're going to go ahead and make the 4-way connection with the 4-way that's already on the vehicle and because this vehicle already had a 4-way on it, we've already gone ahead and tested it to make sure that everything is working properly. You want to make sure when making your connection of the two 4-ways that you use some dielectric grease on the connection before pushing them together. more

12/8/2014 10:12:10 AM

Trailer Brake Controller Installation - 1994 Chevrolet C/K Series Pickup- Video

Today on our 1994 Chevy Pickup, we'll be installing the Curt Triflex Brake Controller, part number C51140. This will be in conjunction with the etrailer Brake Controller Install Kit, part number ETBC7. We'll plug in our trailer and we'll have a CC showing that our trailer wiring is connected, then we can press on the brake pedal and watch the numbers increase. We can also use the hand sweep to energize our trailer braking. Once we remove our trailer wiring from the 7-Pole connector, we'll get a DC for disconnected. To start, we'll first go ahead and assemble the 7-Pole adapter bracket. more

10/15/2014 6:38:54 AM

Putco LED Light Bulb Load-Resistor Kit Installation - 1995 Chevrolet CK Series Pickup- Video

All right, today on this 1995 Chevrolet CK series pickup were going to install part number p230004c from Putco. This is their LED light bulb load resistor kit. Now this trucks had the LED lights installed and we can see here how they are flashing at a high rate. Now to slow it down were going to install the resistors. This is very easy to do. Basically, what were going to do is find our turn signal circuit. more

4/19/2013 10:22:50 AM